sega logo  

PRODUCTS

Service Fluids

Engine & Fuel Additives | Oil Treatment & Brake Fluids

Brake Fluid Dot3  
SEGA DOT 3 Brake Fluid, based on glycol ethers and alkyl polyglycol. It contains inhibitors to prevent the corrosion of metallic brake components and to reduce oxidation at increased temperatures. SEGA DOT 3 Brake Fluid enjoys high wet and dry boiling points. Special moisture scavengers help to minimize the formation of the steam bubbles. SEGA DOT 3 Brake Fluid is the also ideally suited to use in ABS brake system.
- extremely high wet and dry boiling points
- good protection against the formation of st eam bubbles
- stability at low temperatures
- excellent viscosity-temperature behavior
- very good elastomer compatibility
- ensures a high degree of lubricating action on all moving components in the hydraulic brake circuit
- high level of thermal stability throughout the entire period of application
- miscible and compatible with high-quality synthetic brake uids

PACKING: Available in 250ml , 330 ml ,485 ml and 500 ml.

0519-048701 / 330 ml.
0519-048703 / 485 ml.
0519-048702 / 500 ml.
 

Brake Fluid Dot3  
SEGA DOT 3 Brake Fluid, based on glycol ethers and alkyl polyglycol. It contains inhibitors to prevent the corrosion of metallic brake components and to reduce oxidation at increased temperatures. SEGA DOT 3 Brake Fluid enjoys high wet and dry boiling points. Special moisture scavengers help to minimize the formation of the steam bubbles. SEGA DOT 3 Brake Fluid is the also ideally suited to use in ABS brake system.

- extremely high wet and dry boiling points
- good protection against the formation of st eam bubbles
- stability at low temperatures
- excellent viscosity-temperature behavior
- very good elastomer compatibility
- ensures a high degree of lubricating action on all moving components in the hydraulic brake circuit
- high level of thermal stability throughout the entire period of application
- miscible and compatible with high-quality synthetic brake uids

PACKING :
Available in 250ml , 330 ml ,485 ml, 500 ml.

0519-048713 / 485 ml.
0519-048712 / 250 ml.
 

Brake Fluid Dot4  
Brake Fluid DOT 4 brake uid is a synthetic brake uid based on glycol ethers, alkyl polyglycols and glycol ether esters. It contains inhibitors to prevent the corrosion of metallic brake components and to reduce oxidation at increased temperatures. This means that no acid-containing decomposition products are able to form. Brake Fluid DOT 4 brake uid was specially developed to extend the operating life of components in the hydraulic brake and clutch systems of motor vehicles. Brake Fluid DOT 4 brake uid has a high wet and dry boiling point, thus ensuring safe braking even after the absorption of some moisture over an extended period of use. Special moisture scavengers help to prevent against the formation of steam bubbles. Brake Fluid DOT 4 brake uid is also ideally suited for use in ABS brake systems.

- Very high wet and dry boiling points
- Outstanding protection against the formation of steam bubbles
- Excellent stability at low temperatures
- Outstanding viscosity-temperature behavior
- Outstanding elastomer compatibility
- Ensures a very high degree of lubricating action on all moving components in the hydraulic brake circuit
- Very high level of thermal stability throughout the entire period of application
- Miscible and compatible with high-quality synthetic brake uids

PACKING: Available in 250ml , 485 ml

0519-048704 / 250 ml.
0519-048705 / 485 ml.
 

Brake Fluid Dot4  
Brake Fluid DOT 4 brake uid is a synthetic brake uid based on glycol ethers, alkyl polyglycols and glycol ether esters. It contains inhibitors to prevent the corrosion of metallic brake components and to reduce oxidation at increased temperatures. This means that no acid-containing decomposition products are able to form. Brake Fluid DOT 4 brake uid was specially developed to extend the operating life of components in the hydraulic brake and clutch systems of motor vehicles. Brake Fluid DOT 4 brake uid has a high wet and dry boiling point, thus ensuring safe braking even after the absorption of some moisture over an extended period of use. Special moisture scavengers help to prevent against the formation of steam bubbles. Brake Fluid DOT 4 brake uid is also ideally suited for use in ABS brake systems.

- Very high wet and dry boiling points
- Outstanding protection against the formation of steam bubbles
- Excellent stability at low temperatures
- Outstanding viscosity-temperature behavior
- Outstanding elastomer compatibility
- Ensures a very high degree of lubricating action on all moving components in the hydraulic brake circuit
- Very high level of thermal stability throughout the entire period of application
- Miscible and compatible with high-quality synthetic brake uids

PACKING: Available in 250ml

DOT 3 - 0519-048706 / 250 ml.
DOT 4 - 0519-048707 / 250 ml.
 

1 2 3 4 5